elementalONLINE speaks to Girish Rao, Founder at MCM UK, about all things sub-metering, including new solutions for the market that will aid the Net Zero transition.

Q: For readers new to MCM UK, tell us about the company’s origins.

A: MCM UK is a young company built on huge amounts of experience. I’ve spent over five decades in low-voltage switchgear, protection electronics and energy metering, and we formed MCM UK to commercialise advanced multi-circuit sub-metering so building owners can see what every key circuit is doing, not just the main incomer.

Q: What problem are you solving that the market’s current solutions don’t?

A: Legacy ‘sub-metering’ often monitored current only. True energy measurement must multiply voltage × current × power factor on each branch, and only in recent years have multi-circuit systems done this reliably. We’ve pushed the format further, with higher specification in a smaller footprint and at lower cost, with UK-based design and manufacture.

Q: Tell us about your new ‘Little Master’ technology.

A: Little Master integrates the panel server into a 35 mm-wide device – so no bulky extension box – while handling up to 24 circuits with one metering unit. Using specialised current transformers, we bring each circuit’s signal into the device, which performs true energy computation per branch. The result is fewer parts to buy and install, cleaner panels, and materially lower upfront cost.

Q: How does it reduce total cost of ownership?

A: It does so in two main ways: hardware simplification and ultra-low self-consumption. Many multi-circuit meters draw around 9W continuously; Little Master runs at < 1W. Over a long service life that difference adds up. On our modelling, initial outlay plus lifetime energy use delivers ~5:1 cost advantage versus typical systems.

Q: Regulations and market forces are moving quickly. What trends are you designing for?

A: Building rules are tightening from ‘meter the big loads’ towards granular circuit-level visibility, driven by Net Zero and performance certification. A typical board might have ~18 circuits now and expectations are rising. In parallel, renewables variability and EV charging are introducing faster swings on both supply and demand. That reality rewards accurate, responsive sub-metering that can capture low starting currents and bi-directional flows.

Q: How do you stay ahead technically as those needs evolve?

A: We treat software and hardware differently. Software features can be added within days, while hardware iterations move on a roughly one-month cycle. That cadence lets us respond to specifiers’ requests – be it new data points, thresholds or export formats – without long delays. It also reflects our core advantage of hands-on metering know-how built up over decades, now applied to multi-circuit systems.

Q: What is your final message for consultants, contractors and asset owners?

A: If you’re planning to upgrade metering or need circuit-level data to meet future compliance, come and handle the hardware. We believe you’ll see a truer energy measurement, in a smaller package, with lower lifetime cost and a UK team that can iterate quickly as your requirements change.

Be part of elementalLONDON 2026
Join us at Excel London, 25–26 November as elementalLONDON and London Build come together for two days of industry insight, innovation and networking.

Get your free ticket